FUTEC ORIGIN CORPORATION

Dry type flange lubricator / CL-10 type

Best suited as a countermeasure for wear on crane wheels, etc.!
The large-sized lubrication rod requires less frequent replacement.

Lubricating rod/MS400

Best suited as a countermeasure for wear on crane wheels, etc. Can be installed in a narrow space.

Lubricator hose

This is a hose to connect lubricator and tank.

Chain lubricator/ZFD-type

Easy and compact installation. The rubber lubricating wheel helps to carry out a quiet operation.

Tread lubricator/VF-type

A tiny amount of oil is applied to the friction metal surface automatically to extend the life of tread. The product may be used for different purposes.

Brush lubricator for small chains/SRS-1 type (standard brush)

Extend the life of chains drastically with easy and best lubrication! It is simple and compact!

Wire rope lubricator/RWF-type

The rope is directly lubricated at the drum position that helps to extend the life of rope.

Rope lubricator/RR-type

The wire rope sheaves are lubricated automatically. It is effective for lubricating wire rope sheave during passage.

Sheave lubricator/RG-type

Great lubricating effect on the wire rope sheaves. The oil is also transferred to the wire rope.

Exclusive-use lubricating rod for CL-20 type/MS-20 lubricating rod (8 pieces included)

This is a lubricating rod exclusively used for CL-20 type. It ensures safety with the fall-prevention fittings.

Exclusive-use lubricating rod for MCL-type/Lubricating rod

This is an exclusive-use lubricating rod. It ensures safety with the fall-prevention fittings.

Dry lubricator/MCL-type

Best suited as a countermeasure for wear on flat surface, rails and flanges.

Gear lubricator/GF-type

Feeds a minimum required amount of oil while the gear is in operation to prevent gear wear.

20L Tank/TEY-2200 type

Exclusive-use oil tank for FUTEC ORIGIN's lubricator
*Large Capacity Type

5L Tank/EC-7 type

Exclusive-use oil tank for FUTEC ORIGIN's lubricator

Centralized lubrication system/EAL-type

A unit is capable of simultaneously lubricate at six locations. Intermittent lubrication is also possible with a parallel use of controller.

Chain automatic lubricator/CS-type

Oil is applied to the conveyor chain in a timely manner to extend the life of the chain. Installation is easy due to the mechanical structure.

Automatic chain lubrication system/CR-type

Just one shot at a target point for clean lubrication!

Dry type flange lubricator / CL-20 type

Best suited as a countermeasure for wear on wheels of small cranes, etc. It can be installed in a narrow space between traverse wheels.

Chain lubricator/CF-3

A tiny amount of oil is applied to the chain link to prevent wear and extend the life of chain.

Flange lubricator for low-speed vehicles/BF-type

The lubricator produces the antifriction effect by forming an oil film on the flange surface to prevent metal-to-metal (flange to rail) contact.

Chain lubricator/CF-2 Z90